Products > Asian Conveyor Belts > Heat Resistant Belts

Heat 'Resistant Conveyor Belts are manufactured by Asian in various grades to suit specific application areas. Asain Heat Resistant Belts have found wide acceptance in Steel Plants (for handling Sinter and Coke) and Cement Plants (for handling Clinker) in addition to other areas of applications. As a rule, special heat resistant belts are required for transporting materials with a temperature of over 70°C. Materials of this type may consist of sinter, cement, moulding sand, coke etc. The service life of these belts depend not only on the temperature of the materials to be transported and on the construction of the belt but also on a number of other factors such as the wear properties of the materials, the fall during loading, the size of the material, the length of the belt, the speed of the conveyor and any chemical action which may be involved.

Cover Type	Standard & Grade	Minimum Tensile Strength (Mpa)	Minimum Elongation At Break (%)	Maximum Abrasion Loss (mm)	Maximum Temperature	Reference Material
Heat Resistant	DIN -T	13.0	350	150	Upto125 Coarse material and 100 C for fines	Hot Coke, Foundry Sand, Iron Pellets, Sintered ore, Hot lime stone, Cement Clinker and Soda Ash
	IS-HR(T1)	13.0	350	150
	DIN-T	12.5	350	180	Upto150 Coarse material and 125 C for fines
	IS-HR(T2)	12.5	350	180
	ORIL-UHR(T3)EPDM rubber based	10	300	200	Upto200 Coarse material and 1 80 C for fines